A fully portable hand operated tray sealing machine with 'envirocut' zero waste film cutting system capable of up to 6 cycles per minute.

The T2 is supplied with a flat seal profile and zero waste straight edged film cut off blade as standard.

The T2 is ideal for trials and development work or small scale production. It has a very simple tool and film change system that allows many different tray sizes to be sealed using film widths matched to the tray width and providing zero waste.

The T2 has been designed to deliver the same seal force as the fully automatic machinery to ensure excellent seals every time.

  • Atmospheric Seal
  • Gas Flush
  • Hermetic Shrink
  • Vacuum/Gas
  • Skin Pack
  • Skin Plus
  • Skin Deep
< >
  • Features

    Standard design features and benefits

    • Two minute tool changeover
    • Low maintenance polymer bearings
    • Simple and accurate film-feed system with easy film route
    • Maintenance friendly robust construction
    • Accurate temperature and seal pressure control
    • Fully portable bench mounted
    • High accuracy tool alignment system provides a constantly accurate sealing and/or film-cutting relationship with tray flange profile
    • Manual film-feed
    • Simple design and operation
    • All around seal only (No Cut) for packs with pre-cut or hinged lids
    • All around seal with straight cut along film trailing edge
    • Portable, can be operated from a standard 220-240 VAC supply
    • Low cost Purchase

    T2 Sealing Capacity

    The largest tray size that can be accommodated on the T2 is
    280mm long x 220mm wide

    The maximum film reel is 250mm diameter x 220mm width

    Options available

    • Deep tray/pot machine configuration

    T2 Specifications

    Height 207mm
    Standard Length 600mm
    Width 329mm
    Weight 21kg
    Electrical supply 230 VAC 50Hz 1kW
    Transformers are available to accommodate the electrical supplies in different countries

    T2 Production Speed

    up to 6 cycles per minute

  • Images
  • Packaging Materials


    • C·PET
    • A·PET
    • R·PET
    • Polypropylene
    • PVC
    • Styrene
    • Board
    • Paper
    • Smooth Wall Foil
    • Cardboard Sandwich Skillets


    • Co-extruded and Laminated Polyester Films
    • Foil
    • Board
    • Paper
  • MAP

    Modified Atmosphere Packaging

    Modified Atmosphere Packaging is a food packaging method where the Earth's normal breathable atmosphere has been modified by either a single gas or a mixture of gases. It is generally used with a barrier film with low oxygen transmission and is sometimes referred to as Gas Flushing.

    The atmosphere in an MA package may contain N2, O2, CO2. Each food product has its own ideal gas mixture to ensure the longest shelf life possible.

    The Gases

    Carbon dioxide (CO2)

    Carbon dioxide inhibits the growth of most aerobic bacteria and moulds. Generally speaking, the higher the level of CO2, the longer the achievable shelf-life. In most cases where CO2 is needed to control bacterial and mould growth, a minimum of 20-30% is required. However, CO2 can be absorbed by fats and water and in some cases cause pack collapse.

    Nitrogen (N2)

    Nitrogen is an inert gas and is used to exclude air; it is also used as a balance gas (filler gas) to make up the difference in a gas mixture. It helps prevent pack collapse where the CO2 has been absorbed. For modified atmosphere packaging of dried snack products, 100% nitrogen is used to prevent oxidative randicity.

    Oxygen (O2)

    In many foods oxygen should be excluded but there are often good reasons for it to be present in the map gas mixture. 

    • To maintain fresh, natural colour in red meat
    • To maintain respiration (in fruit and vegetables)
    • To inhibit growth of anaerobic organisms (in some types of fruit and vegetables)

    Ideal residual oxygen levels are dependent upon each customer's shelf life trials and tolerances.

    Food manufacturers should seek the advice of Food grade gas suppliers before deciding which gas supply mode is the most appropriate for their needs.

    Guidelines have been quoted in the CCFRA (Campden and Chorleywood Food Research Association) map guide document.

    Product Nitrogen
    Carbon Dioxide
    Achievable Shelf Life
    Beef   70–80 20–30 5 to 8
    Lamb   70–80 20–30 5 to 8
    Pork   70–80 20–30 5 to 8
    Chicken various   70–80 20–30 10 to 14
    Chicken various 50 20 30 10 to 14
    Chicken various 70   30 10 to 14
    Turkey   70–80 20–30 7 to 14
    Turkey 70   30 10 to 14
    Duck   70–80 20–30 10 to 14
    Sausage   70–80 20–30 10 to 14
    Bacon 70   30 14 to 21
    Cooked Meat 70   30 14 to 21
    Cooked Chicken 70   30 14 to 21
    Charcuterie 70   30 14 to 21
    Raw White Fish 30 30 40 4 to 6
    Raw Oily Fish 70   30 4 to 6
    Crustaceans 30 30 40 4 to 6
    Cooked Fish 70   30 7 to 21
    Ready Meals 50–70   30–50 7 to 14
    Sandwiches 70   30 3 to 5
    Pies/Sausage Rolls 70   30-50  7 to 14 
    Quiche 70   30–50 7 to 14
    Salads/Vegetables 90 5 5 5+
    Hard Cheese 50–70   30–50 2 to 12
    Pasta 50   50 3 to 4
    Bakery 0–30   70–100 2 to 12